One-Piece Flagpoles (Internal Halyard) (ALL FLAGPOLE PRICES ARE F.O.B. FACTORY)
Flags International® uses only the highest quality, U.S. manufactured, aluminum tapered one-piece flagpoles. Internal halyard flagpoles were created to help stop vandalism and theft of the flag(s). It also provides a “cleaner” look to the outside of the pole. The rope runs through the inside of the pole and is held at the bottom by a cam cleat. A door with a cylinder lock in a reinforced frame provides access to the cam cleat in order to raise and lower the flag. These flagpoles come standard with a brilliant satin finish. Flagpoles with a diameter of 6 inches and larger are provided with a revolving truck, a gold aluminum ball, spun aluminum flash collar, one pair of chrome snaps, an internal nylon or polypropylene halyard assembly, a corrugated steel ground sleeve with grounding spike, and 2 keys. The 5-inch diameter pole comes standard with a stationary truck instead of the revolving which can be upgraded for a nominal fee. Other upgrades include the heavy-duty revolving truck with sealed bearings, cast aluminum flash collar, cast Ball/Truck assembly, and snap covers. Other finishes including Duranodic bronze, clear anodized, and powder coat are also available as a special order. Additional charges apply to all upgrades and special finishes. The clear anodized finish upgrade is highly recommended as it will help the flagpole to maintain a “like new” appearance. The wait for a special finish flagpole may be longer than that of a satin finished flagpole. If you don't see what you are looking for here, please give us a call or e-mail with your question.
These poles are seamless T-6063 aluminum finished deep luster and gracefully tapered. Components, or accessories, are of cast or spun aluminum. Flagpoles of 40 feet or longer are made in two or more pieces. Shorter poles may be purchased in two pieces upon request.The strength of the pole being purchased is an important factor - Carefully consider this issue.
Giant Outdoor Eagle Finial Aluminum gold-finished eagle finial. 1/2 " thread accommodates all poles listed above except tailgater. 15" wingspan.
NAME
$115.00
Giant Outdoor Eagle Finial
Outdoor Ball Finials Aluminum, gold anodized ball finials. 1/2 " thread accommodates all poles listed above except tailgater. Available in different finishes upon request, call for details.
3"
4"
5"
6"
8"
10"
12"
$20.00
$28.00
$32.00
$39.00
$72.00
$130.00
$150.00
Cleats Used to tie rope around. Cast aluminum, stainless steel, and nylon available.
NAME
LENGTH
$4.00
(A) Aluminum Cleat
4"
$9.90
(A) Aluminum Cleat
6"
$14.00
(A) Aluminum Cleat
9"
$4.00
(B) Nylon Cleat
4"
$4.00
(C) Stamped Steal Cleat
4-1/2"
Dock Mounts
Aluminum dock-mounts to mount your in-ground flagpole to a deck, post, dock, etc. Comes with PVC adapters for multiple diameters.
NAME
$70.00
(A) Dock-Mount
$70.00
(B) Deck-Mount
$75.00
(C) Post-Mount
Drive-Over Base Aluminum drive-over base is ideal for camping and tailgating. Comes with PVC adapters for multiple diameters.
NAME
$80.00
Aluminum drive-over base
Flag Snaps & Covers
Standard snaps in nylon, and brass or cast chrome-plated nickel. Heavy-duty snaps (D) are available in brass coated only.
$2.00
(A) Pair of Nylon snaps
$4.00
(B) Pair of Brass snaps
$4.00
(C) Pair of Chrome snaps
$6.00
(D) Pair of Heavy-duty Brass snaps
$3.00
(E) Standard snap covers (for A, B, or C)
$3.50
(F) Heavy-duty snap covers (for D)
Trucks & Pulleys
Side Mount Pulley (C)
$18.00
Aluminum, 1-1/2"x4"x2-1/2" Nylon Sheave
Small Pulley (D)
$4.00
Aluminum, 1"x2"x1/2" Brass Sheave
Stationary Trucks (A)
$25.00
Aluminum, 2" OD
$30.00
Aluminum, 2-3/8 " OD
$33.00
Aluminum, 3 " OD
$50.00
Aluminum, 3-1/2 " OD
$100.00
Aluminum, 4 " OD
$50.00
Aluminum, 3 " OD Internal Halyard
Revolving Trucks (B)
$70.00
Aluminum, 2" OD Cap Mount
$83.00
Aluminum, 2-3/8" OD Cap Mount
$86.00
Aluminum, 3 " OD Cap Mount
$60.00
Aluminum, Spindle Mount
$170.00
Aluminum, HD Spindle Mount (sealed bearings)
$165.00
Aluminum, Internal Rope
$250.00
Aluminum, HD Internal Rope (sealed bearings)
$70.00
Aluminum, Slipfitter 2-3/8"
$55.00
Aluminum, Slipfitter 3 "
$55.00
Aluminum, Slipfitter 3-1/2 "
Halyard
Braided nylon rope for your flagpole.
Cost Per Foot
Cost Per Spool (500ft)
1/4" White Braided Nylon
$.30
$120.00
5/16" White Braided Nylon
$.40
$160.00
3/8" White Braided Nylon
$.50
$200.00
1/4" White Braided Nylon
(wire-core)
$.80
$320.00
Retainer Rings For flagpoles with internal halyards. Stainless steel aircraft cable ring with nylon beads that inhibits the wind from pulling your flag away from your flagpole.
Cost Per Foot
5" (27" length) Brown or White
$42.00
6" (31" length) Brown or White
$45.00
Counterweight
For internal halyard flagpoles. Constructed from 2" diameter steel, heavily coated with plastisol with plated eyebolts. Keeps rope and retainer ring taught.
Cost Per Foot
3-1/2lb Brown or White Counterweight
$50.00
7lb Brown or White Counterweight
$60.00
Flash Collars Ornamental covering that adds a finished look to the bottom of your flagpole and protects your ground sleeve from the elements.
the flag(s). It also provides a “cleaner” look to the outside of the pole. The rope runs through the inside of the pole and is held at the bottom by a cam cleat. A door with a cylinder lock in a reinforced frame provides access to the cam cleat in order to raise and lower the flag. These flagpoles come standard with a brilliant satin finish. Flagpoles with a diameter of 6 inches and larger are provided with a revolving truck, a gold aluminum ball, spun aluminum flash collar, one pair of chrome snaps, an internal nylon or polypropylene halyard assembly, a corrugated steel ground sleeve with grounding spike, and 2 keys. The 5-inch diameter pole comes standard with a stationary truck instead of the revolving which can be upgraded for a nominal fee. Other upgrades include the heavy-duty revolving truck with sealed bearings, cast aluminum flash collar, cast Ball/Truck assembly, and snap covers. Other finishes including Duranodic bronze, clear anodized, and powder coat are also available as a special order. Additional charges apply to all upgrades and special finishes. The clear anodized finish upgrade is highly recommended as it will help the flagpole to maintain a “like new” appearance. The wait for a special finish flagpole may be longer than that of a satin finished flagpole. If you don't see what you are looking for here, please give us a call or 
